Toshiba M10, TECRA 4.26 Battery lock

4 Replacement Procedures 4.26 Battery lock
4.26 Battery lock
Removing the Battery lock
To remove the battery lock, follow the steps below and refer to Figure 4-48.
1. Remove the battery lock button L while pushing latches inside to release them.
2. Turn up the insulator (BATT LOCK L INSULATOR) and remove the battery lock
L from the slot.
3. Remove the battery lock button R while pushing latches inside to release them.
4. Remove the battery lock R from the slot.
CAUTION: When removing the battery locks, be careful not to lose the springs.
Spring
4-76 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)
Figure 4-48 Removing the battery lock
Battery lock button L
Battery lock button R
Battery lock L
Battery lock R
Latch
Latch
Insulator
(BATT LOCK L INSULATOR)
Spring