Toshiba TECRA, M10 manual Replacement Procedures4.23 PC card unit, Removing the PC card unit

4 Replacement Procedures4.23 PC card unit

4.23 PC card unit

Removing the PC card unit

To remove the PC card unit, follow the steps below and refer to Figure 4-45.

1.	Remove the following screws securing the PC card unit.
	•	M2.0⋅3C	Tapping screw	⋅2
	•	M2.0⋅8C	Tapping screw	⋅2
2.	Remove the PC card unit while releasing the latches.
				Latch

PC card unit

M2.0x8C Tapping

M2.0x3C Tapping M2.0x3C Tapping

M2.0x8C Tapping

Figure 4-45 Removing the PC card unit

4-70 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)