Toshiba M10, TECRA manual Replacing 14.1-inch Samsung fluorescent lamp Wxga

4.35 Fluorescent Lamp 4 Replacement Procedures

4. Separate the panel assembly and backlight unit.

CAUTION: Handle with care not to damage COF of S/D.

Panel assembly

Figure 4-79 Replacing 14.1-inch Samsung fluorescent lamp (WXGA) (4)

Installing the fluorescent lamp

The installing procedure of the 14.1-inch WXGA Samsung fluorescent lamp is the reverse of the above disassembly procedure. Refer to figures 4-76 to 4-79.

1.Install the panel assembly on the backlight unit.

2.Install the top chassis on the molded frame.

3.Stick the yellow tapes, lamp-wire tape and bottom Al tape.

4.Stick the PCB cover.

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-121