4.27 Touch pad/Fingerprint sensor board | 4 Replacement Procedures |
3.Disconnect the touch pad FFC, touch pad button FFC and dual button FFC from the connector CN9650 and CN3240 on the fingerprint sensor board and connector on the touch pad.
NOTE: In models without a dual button, there is no dual button FFC.
4. Remove the unit dual pad (with the fingerprint sensor board).
Touch pad FFC
Unit dual pad | Touch pad | |
button FFC | ||
(with the fingerprint sensor board) | ||
|
CN9650
|
| CN3240 |
Dual button FFC |
| |
|
| |
|
|
|
Connector
Figure 4-50 Removing the touch pad/fingerprint sensor board (2)
TECRA M10 Maintenance Manual | [CONFIDENTIAL] |
