Toshiba M10, TECRA manual Replacing 14.1-inch LG fluorescent lamp WXGA-CSV

4.35 Fluorescent Lamp 4 Replacement Procedures

Assembly of outside tape/Cover shield

1. Assembly of Cover shield (S)1.

CAUTION: Pressure or stress should not be given on Source PCB. Usage of gloves with anti-electric discharge coating is recommended to eliminate possible damage on circuits occurred by ESD.

2. Assembly of Tape Adhesive2 used for Top case fixing.

CAUTION: Pressure or stress should not be given on Top case during this process.

Figure 4-95 Replacing 14.1-inch LG fluorescent lamp (WXGA-CSV) (8)

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-137