Best UP271, UP27E manual Reinstall Grease Drip Rail and Baffle Filters, Light Bulbs Replacement

13.REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS

Reinstall the grease drip rail.

HD0214

CAUTION

Remove protective plastic film covering Evolutionary™ hybrid baffle filters before installing them.

13.1DUCTED INSTALLATION:

Reinstall Evolutionary™ hybrid baffle filters on the hood.

13.2NON-DUCTED INSTALLATION:

Slide out and discard the secondary micromesh filters from the back of the baffle filters. Slide in the charcoal filters included in the non-duct kit. Reinstall the baffle filters on the hood.

It is recommended to install side filters first and finish with center one.

1.Insert one end of Evolutionary™ hybrid baffle filter into the front channel of the hood.

2.Raise the other end toward the inside of hood and insert in the grease drip rail of the hood.

Replacement filters are available from your dealer. See label inside hood for size and part number.

For charcoal filter replacement kit, see table on pages 15 and 16.

1	2
HD0209

14.LIGHT BULBS REPLACEMENT

!WARNING

In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed fixtures.

This hood must use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (included).

!WARNING

In order to prevent the risk of personal injury, the halogen lamps must be cooled down before removing them.

1.To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.

NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.

2.Install the new lamps by placing the bulb leads into their grooves in the socket.

3.Gently push upwards and turn clockwise until secure.

1 2 3

HO0089

- 12 -