Best UP27E Use And Care, Operation, Evolutionary Hybrid Baffle Filters, Grease Drip Rail, Don’t

15.USE AND CARE

Evolutionary™ Hybrid Baffle Filters

The Evolutionary™ hybrid baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates greater grease—like frying foods or wok cooking.

Remove Evolutionary™ hybrid baffle filters by pushing them towards the front of hood and rotating filters downward. Slide out the secondary micromesh filter from the back of each hybrid baffle filter before cleaning. Baffle filters are dishwasher safe. Clean secondary filters with a warm detergent solution. Allow filters to dry completely before reinstalling them in the hood.

CAUTION

Never attempt to wash the carbon filters in the non-duct kit. Those filters must be replaced by new ones. Refer to the non-duct kit installation instructions for details.

Grease Drip Rail

The grease drip rail should be cleaned frequently. Lift it out from the hood and use a warm detergent solution. As for the baffle filters, wash more often if your cooking style generates greater grease—like frying foods or wok cooking. Allow grease drip rail to dry completely before reinstalling it in the hood.

Blower Cleaning

INTERIOR BLOWER

Remove the filters in order to access the blower. Vacuum blower to clean. Do not immerse in water.

EXTERIOR OR IN-LINE BLOWER

Refer to blower instruction manual for more details.

Hood Cleaning

Stainless steel cleaning: How to maintain its “BRIGHT LOOK”

Do:

•Regularly wash with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.

•Always clean in the direction of original polish lines.

•Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.

•You may also use a specialized household stainless steel cleaner.

Don’t:

•Do not use any steel or stainless steel wool or any other scrapers to remove stubborn dirt.

•Do not use any harsh or abrasive cleansers.

•Do not allow dirt to accumulate.

•Do not let plaster dust or any other construction residues reach the hood. During construction/renovation, cover the hood to make sure no dust sticks to stainless steel surface.

Avoid: When choosing a detergent

•Any cleaners that contain bleach will attack stainless steel.

•Any products containing: chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.

•Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc., are highly explosive and should never be used close to a range.

16.OPERATION

Always turn ON your hood before you begin cooking in order to establish an air flow in the kitchen. Let the blower run for a few minutes to clear the air after you turn off the range. This will help keep the whole kitchen cleaner and brighter.

2	1	3	4
HC0030

1. ON/OFF Blower switch	3. ON/OFF Halogen light switch
2. Blower speed control	4. Light intensity control

Blower

The blower is operated using two (2) controls.

Use the ON/OFF toggle switch (item 1 on picture above) to start and stop the blower. When turned on, the blower will operate at the previous setting of the speed control (item 2 on picture above).

Turn the speed control knob counterclockwise to increase blower speed—clockwise to decrease speed.

- 13 -