![Figure C](/images/new-backgrounds/89693/8969315x1.webp)
|
|
|
|
| Air Outlet |
|
|
|
|
| |
|
|
|
|
| |
Main Unit |
|
|
|
| N2 Outlet |
|
|
Tire Inflation Unit
Blue N2 Hose (505)
Orange Air Hose (506)
Figure C
ASSEMBLY INSTRUCTIONS
1.Connect the orange Air Hose (506) to the Air Inlet (when facing fittings, viewed on left side) of the Tire Inflation Unit, and to the Main Unit Air outlet. For these steps, refer to Figures C and D.
Refer to connector labels on each unit. Hose connectors snap on.
2.Connect the blue N2 Hose (505) to the Tire Inflation Unit N2 Inlet (right side when facing fittings), and to the Main Unit N2 Outlet.
3.Connect the air supply hose (not supplied) from the air compressor (not supplied) to the Filter - Regulator (10) on the Main Unit. See Figure D,
4.Optionally, if an additional, larger N2 supply tank is required, it can be connected to the rear of Main Unit labeled N2 Outlet. The hose for this connection is not supplied.
Hose Connection from | Main Unit (front) | Main Unit (rear) |
Air Compressor | Hose Connections | Extra N2 Tank |
|
| Connection |
| Figure D |
|
SKU 95105 | For technical questions, please call | Page 8 |