Switching the text display.
1Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2Enter display control mode
Press the [3] ("DISP") button.
3Select the text
Press the [3] ("TEXT") button.
It can also be switched by pressing either [4] or [ยข] button.

Text Display Switching

2Enter display control mode
Press the [3] ("DISP") button.
3Select the display mode
Press the [2] ("MODE") button.
Each time the button is pressed the display mode switches as
shown below.
Display Display Mode
"Display C" Demonstration.
"Display A" Normal display type
"Display B" Silent display type.
4Exit display control mode
Press the [RTN] button.
Switching the display mode.
1Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).

Display Mode Switching

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Speaker Setting mode
Press the [Q] button.
3Select the Speaker type
Press the [2] โ€” [5] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Button Display
OFF [2] "SP OFF"
For 5 & 4 in. speaker [3] "SP 5/4inch"
For 6 & 6x9 in. speaker [4] "SP 6*9/6inch"
For the OEM speaker [5] "SP O.E.M."
4Exit Speaker Setting mode
Press the [Q] button.

Speaker Setting

General features
โ€” 14โ€”
English
KDC-MP822_U.S 02.12.11 11:23 AM Page 14