PROBLEM | POSSIBLE CAUSE | SOLUTION |
The faceplate does not open or close.
The ambient temperature is too low. | Warm up your car. |
A CD ejects as soon as it is loaded.
The CD is
Load the CD with the labelled side up.
| The CD is quite dirty. | Clean the CD, referring to the section on "Cleaning CDs" (see |
|
| page 5). |
|
|
|
The sound skips on a CD. | The CD is scratched or dirty. | Clean the CD, referring to the section on "Cleaning CDs" (see |
|
| page 5). |
|
|
|
The specified track does not | Random play has been selected. | Turn off the random play function. |
play.
Disc Changer
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
| |
The disc changer mode cannot | No cable has been connected to the disc changer input | Connect the cable to the disc changer input terminal on the | |
be selected. | terminal on the unit. | unit. | |
|
|
| |
The specified disc does not | The specified CD is very dirty. | Clean the CD. | |
play, but another one plays |
|
| |
The CD is | Load the CD with the labelled side up. | ||
instead. | |||
|
|
| |
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the | |
|
| specified disc. | |
|
|
| |
| The disc is severely scratched. | Try another disc instead. | |
|
|
| |
The sound skips. | Something is touching the disc changer. | Remove whatever is touching it. | |
|
|
| |
| The CD is scratched or dirty. | If skipping happens at the same place when the car is | |
|
| stopped, something is wrong with the CD. Clean the CD. | |
|
|
| |
The display shows that the | The computer chip in the unit is not functioning normally. | Press the reset button on the unit (see page 4). | |
changer is being played, but no |
|
| |
sound can be heard. |
|
|
The specified track does not play.
Random play or magazine random play has been selected. | Turn off the random play or magazine random play function. |
— 43 —