KDC-5047U  KMR-440U 
Press the [FNC] button for at least 1 second. “BT MODE” is displayed.
2 Enter Function setting mode Press the [FNC] button.
3 Select Bluetooth Firmware update mode The item can be selected and determined as follows.
”Settings” ➜“Detailed Settings” ➜“BT F/W
Update”
To select the item, turn the Control knob. To determine the item, press the [ENTER] button. The firmware version appears.
4 Exit Bluetooth mode Press the [SRC] button.
⁄
• For how to update the firmware, access our web site. www.kenwood.com/bt/information/
Function of KCA-BT200 (Optional Accessory)
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags.
1 Enter Bluetooth mode
Press the [FNC] button for at least 1 second. “BT MODE” is displayed.
2 Enter Function setting mode Press the [FNC] button.
3 Select Phonebook name edit mode
The item can be selected and determined as follows.
”Settings” ➜“Voice Tag” ➜“PB Name Edit”
To select the item, turn the Control knob. To determine the item, press the [ENTER] button.
4 Search for the name to register
Turn the Control knob to select name, and then press the [ENTER] button.
If a voice tag has already been registered for a name, “*” is displayed before the name.

Displaying the Firmware Version

Display the version of the firmware of this unit.

1Enter Bluetooth mode

 KDC-BT50U 

Press the [] button.

5Select a mode

Turn the Control knob.

Display

 

Operation

“Register”

 

Register a voice tag.

“Check”*

 

Play a voice tag.

“Delete”*

 

Delete a voice tag.

*Displayed only when a name for which a voice tag has been registered is selected.

Selecting “Register” (Regist)

6Register a voice tag (first)

Press the [ENTER] button. When you hear a beep, speak the voice tag within 2 seconds.

7Confirm the voice tag (second)

Press the [ENTER] button. When you hear a beep, speak the same voice tag again within 2 seconds.

“Completed” is displayed.

8Exit Function setting mode

Press the [] button for at least 1 second. Return to step 2. You can register another voice tag continuously.

⁄

•If your voice cannot be recognized, a message is displayed. (Refer to <Troubleshooting Guide> page 36)

Pressing the [ENTER] button allows you to retry voice input.

Selecting “Check” (Play)

6Press the [ENTER] button.

Play the registered voice and return to step 2.

Selecting “Delete” (Delete)

6Delete a voice tag

Press the [ENTER] button.

7Turn the Control knob to select “YES”, and then press the [ENTER] button.

Exit Bluetooth mode

Press the [SRC] button.

English 31