Kenwood KDC-5047U, KDC-BT50U Audio Preset Memory, Audio Preset Recall, 1Setup Audio Control, Press the [FNC] button, Press the [FNC] button, Exit Audio Control mode

Audio Adjustments

Audio Preset Memory

Registering the value setup by Audio Control.

1Setup Audio Control

Setup the <Audio Control> (page 7).

2Enter Audio Control mode

 KDC-5047U   KMR-440U 

Press the [AUDIO] button.

 KDC-BT50U 

1)Press the [FNC] button.

2)Turn the Control knob to select “Audio Control”, and then press the [ENTER] button.

3Select Audio preset memory modeThe item can be selected and determined as follows.“Detailed Settings” ➜“Audio Preset”

To select the item, turn the Control knob. To determine the item, press the [ENTER] button.

4Select the Audio Preset MemoryTurn the Control knob to select “Memory”, and then press the [ENTER] button.5Turn the Control knob to select “YES”, and then press the [ENTER] button.

“Memory Completed” is displayed.

6Exit Audio Control mode

Press the [] button for at least 1 second.

⁄

•To use this function, this unit must be powered for more than one hour.

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

•The following items can be registered.

“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”, “Middle Center FRQ”, “Middle Level”, “Middle Q Factor”, “Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF Front”, “HPF Rear”, “LPF SubWoofer”, “Subwoofer Phase”

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 8).

1Select the source Press the [SRC] button.

For how to select source item, refer to <Power and source selection> (page 4).

2Enter Audio Control mode

 KDC-5047U   KMR-440U 

Press the [AUDIO] button.

 KDC-BT50U 

1)Press the [FNC] button.

2)Turn the Control knob to select “Audio Control”, and then press the [ENTER] button.

3Select Audio preset memory mode

The item can be selected and determined as follows.

“Detailed Settings” ➜“Audio Preset”

To select the item, turn the Control knob. To determine the item, press the [ENTER] button.

4Select the Audio Preset RecallTurn the Control knob to select “Recall”, and then press the [ENTER] button.

5Turn the Control knob to select “YES”, and then press the [ENTER] button.

“Recall Completed” is displayed.

6Exit Audio Control mode

Press the [] button for at least 1 second.

8 KDC-BT50U/ KDC-5047U/ KMR-440U