Troubleshooting Guide / Guide de depannage / GuiaSobre Localización De Averias / Guia de Diagnóstico
31
What might seem to be a malfunction in your unit may just be the result of slight
misoperation or miswiring. Before calling service, first check the following table
for possible problems.
?Sound skips due to vibration.
✔The unit is mounted at a slant.
☞Mount the unit so that is level.
✔Changer unit is mounted in an unstable place.
☞Mount the unit in a stable place.
✔The angle adjustment switches are set improperly.
☞Set the angle adjustment switches to the correct positions.
?The disc changer mode cannot be selected.
✔The O-N selection switch of the disc changer is not set properly.
☞Set the O-N selection switch to "O" position.
?Cannot play an MP3.67
✔Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞Use a medium conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
✔The MP3 has no or invalid track name extension.68
☞Add the ".MP3" extension to the MP3 track name.
✔The media is scratched or dirty.69
☞Clean the media.
?Noise or no sound generated when an MP3 is played.70
✔The track has the MP3 track name extension while it is not an MP3.
☞Do not use the ".MP3" extension in non-MP3.
?Takes time before the unit starts playing MP3.71
✔The medium contains many albums, tracks, and hierarchical levels.
☞The unit checks all tracks on the loaded medium first. If the medium has many tracks recorded, it may
take a long time for the unit before it starts playing MP3.
?Fails to play MP3 in the intended order.72
✔The MP3 tracks were not written by the CD writer in the order in which you wanted them to be played.
☞Depending on the CD writer, you may be able to set the order in which MP3 tracks are to be played by
writing them onto a medium with their track names beginning with play sequence numbers such as
"01" to "99".
?The sound skips when an MP3 is being played.73-1
✔The media is scratched or dirty.
☞Clean the media.
✔The recording condition is bad.73-2
☞Record the media again or use another media.
?Can’t enter Folder Search mode.76
✔There’s no folder recorded in the MP3 media.
☞Use a media with levels.
?The songs in the selected folder aren’t played in Folder Search mode.77
✔There are no MP3 in the selected folder.
☞Make sure there’s recorded content in the MP3 media.
?The MP3 track search takes time.78
✔Many tracks are recorded on the media.
☞When the media directory is complex, the track search can take time.
?The MP3 track time isn’t displayed correctly.80
✔---
☞There are times when it isn’t displayed correctly according to the MP3 recording conditions.
When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Do not forget to
attach the transport screws before transporting the CD changer.
The CD changer may be damaged during transport if a magazine or CD is left inside it or the transport screws are
not attached.
KDC-CX89/C71(KE)(En,F,Es,P) 02.12.13 5:29 PM Page 31