Selecting the Bluetooth Device You Wish to Connect

When 2 or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use.

1Select Bluetooth device selection mode

For how to select setup item, refer to <Bluetooth Setup> (page 22).

Cell-phone:

Select “SETTINGS” > “PHONE SELECT”.

Audio player: KDC-HD545U with KCA-BT200 (Optional) only

Select “SETTINGS” > “AUDIO SELECT”.

2Enter Bluetooth device selection mode Press the [VOL] knob.

“(name)” is displayed.

3Select the Bluetooth device Turn the [VOL] knob.

4Set up the Bluetooth device Press the [VOL] knob. ‘✱(name)’ or ‘-(name)’ is displayed.

“✱”: The selected Bluetooth device is busy.

“-”: The selected Bluetooth device is on standby.

“ “ (blank): The Bluetooth device is deselected.

5Exit Function Setting mode

Press the [] button for at least 1 second.

⁄

•If a cell-phone is already selected, deselect it, and then select a different one.

Downloading the SMS

Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit.

1Select SMS download mode

For how to select setup item, refer to <Bluetooth Setup> (page 22).

Select “SETTINGS” > “SMS DOWNLOAD”.

2Enter SMS download mode Press the [VOL] knob. “DOWNLOADING” is displayed.

When the downloading finishes, “COMPLETE” is displayed.

3Exit Function Setting mode

Press the [] button for at least 1 second.

⁄

•The cell-phone must be able to transmit the SMS using Bluetooth. Setting on the cell-phone may be required. If the cell-phone does not support SMS function, the SMS download item in Function Control mode is not displayed.

•When the SMS is downloaded from the cell-phone, the unopened messages in the cell-phone are opened.

English 25