General features

System Q

Selecting the best sound setting preset for different types of music.

1Select the source to set Press the [SRC] button.

2Select the Sound type Press the [Q] button.

When you press the button once, the current sound setting is displayed.

Each time you press the button, the sound setting alternates.

Sound setting

Display

User memory*

"USER"

Rock

"ROCK"

Pops

"POPS"

Easy

"EASY"

Top 40

"TOP 40"

Jazz

"JAZZ"

Natural

"NATURAL"

•* User memory: The values set on the <Audio Control> (page 12).

KDC-MP532U does not have the User memory function so the values of Bass, Middle, and Treble set in audio control are replaced to the System Q values and "USER" is not displayed when the System Q setting is changed.

•Change each setting value with the <Speaker Setting> (page 14).

First, select the speaker type with the Speaker setting.

Audio Control

1Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the [VOL] knob.

3Select the Basic Audio item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Adjust the Basic Audio item Turn the [VOL] knob.

Adjustment Item

Display

Range

Rear Volume *1,2

"R-VOL"

0 — 35

Subwoofer level*1,3,4,5

"SW L"

–15 — +15

Bass level*6

"BAS L"

–8 — +8

Middle level*6

"MID L"

–8 — +8

Treble level*6

"TRE L"

–8 — +8

Balance

"BAL"

Left 15 — Right 15

Fader*5

"FAD"

Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

•*1 Function of KDC-X590/MP632U.

•*2 You can control this item when "2ZON" of <Audio Setup> (page 14) is set to "ON".

•*3 You can control this item when <Switching preout> (page 30) is set to "SWPRE SW". (KDC-MP632U only)

•*4 You can control this item when <Subwoofer Output> (page 15) is set to "SW ON".

•*5 You can control this item when "2ZON" of <Audio Setup> (page 14) is set to "OFF".

•*6 You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control>(Page13). (KDC-X590 only)

•*6 Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included : KDC-X590 only)

5Exit Audio Control mode Press any button.

Press a button other than the [VOL] knob and [ATT] button.

12 English