Kenwood KDC-MP533V Screwing the Faceplate on the Unit

Installation

Screwing the Faceplate on the Unit

If you want to fasten the faceplate to the main unit so that it does not fall off.

1Refer to the section <Removing the hard rubber frame> (page 25) and then remove the hard rubber frame.

2Drop open the faceplate by pressing the Release button.

3Tighten the screw (ø2 × 5 mm) (Accessory5) and bracket (Accessory6) in the hole shown on the diagram.

Accessory6

Accessory5

4Tighten the screw (ø2 × 5 mm) (Accessory5) and bracket (Accessory7) in the hole shown on the diagram.

Accessory7

Accessory5

•Never insert the screws in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit.

24 English

Contents

Page Safety precautions Notes About CDs About MP3 and WMA General features 2WARNING To prevent injury or fire, take the following precautions: Attach the panel while you are on the vehicle 2CAUTION To prevent damage to the machine, take the following precautions: Cleaning the Unit Cleaning the Faceplate Terminals The marking of products using lasers (Except for some areas) Handling CDs When using a new CD CD accessories CD cleaning Removing CDs Playable Audio file Playable MP3 file Playable WMA file Playable media Playable disc format Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Theft Deterrent Faceplate TEL Mute Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting Playing CD, Audio file & VCD Fast Forwarding and Reversing Track/File Search Folder Search Direct Track/File Search Track/File/Folder Repeat Folder Select Audio output select Text/Title Scroll Menu System Touch Sensor Tone Manual Clock Adjustment DSI (Disabled System Indicator) Dimmer CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting Text Scroll Built-inAuxiliary Input Setting CD Read Setting Switches the NTSC/PAL setting Loading and Replacing the battery Basic operations In Tuner source In Disc source Accessories Installation Procedure 2WARNING Page non-Japanesecars Japanese cars Using the Relay Connector Screwing the Faceplate on the Unit Removing the hard rubber frame