10 | English
General features
Switching Display
Switching the information displayed.
1 Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SEL" is displayed.
2 Select the Display item
Push the Control knob to [4] or [¢].

In Tuner source

Information Display
Frequency "FREQ"
Clock "CLOCK"

In CD & External disc source

Information Display
Disc title* "D-TITLE"
Track title* "T-TITLE"
Track number & Play time "P-TIME"
Clock "CLOCK"

In Audio file source

Information Display
Song title & Artist name* "TITLE"
Album name & Artist name* "ALBUM"
Folder name "FOLDER"
File name "FILE"
Track number & Play time "P-TIME"
Clock "CLOCK"

In Auxiliary input source

Information Display
Auxiliary input name "SRC NAME"
Clock "CLOCK"
3 Exit Switching Display mode
Press the Control knob.
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.(KDC-MP6029
only)
• * If the contents of the information cannot be
displayed, Playtime is displayed.
• When the clock display is selected, the display setting
of each source will be switched to the clock display.
(KDC-MP5029 only)
• Album name cannot be displayed in WMA file.
• Song title, Artist name, and Album name cannot be
displayed in AAC file.

Function of the KDC-MP5029

Dimmer Control
You can change the unit's display to dimmer.
Press the [DIM] button for at least 1 second.
Each time the button is pressed for 1 second, the
Dimmer contol turns ON and OFF.
When it’s ON, "DIM ON" is displayed.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.

Removing the Faceplate

1 Press the Release button.
Drop open the faceplate.
2 Drawing the faceplate to left side pull it to
the front and remove it.
• The faceplate is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the faceplate in its special storage case while
detached.
• Do not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.

Reattaching the Faceplate

1 Align the shaft on the unit with the
depression on the faceplate.