⁄

•When you activate the Security Code function, it cannot be released.

Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package.

1Enter Standby

Press the [SRC] button. Select the "STANDBY" display.

2Enter Menu mode

Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is displayed.

3Enter Security Code mode

Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed.

4Select the digits to enter

Push the Control knob towards [4] or [¢].

5Select the Security Code numbers

Push the Control knob towards [FM] or [AM].

6Repeat step 4 and 5, and complete the Security Code.7Confirm the Security Code

Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed.

8Do the step 4 through 7 operation, and reenter the security code.

"APPROVED" is displayed.

The Security Code function activates.

9Exit Security Code mode Press the [MENU] button.

⁄

•If you enter a Code different from your Security Code, you have to start over from step 4.

Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed

1Turn the power ON.2Do the step 4 through 7 operation, and reenter the security code.

"APPROVED" is displayed. Now, you can use the unit.

⁄

•If an incorrect code is entered, "WAITING" is displayed, and the input prohibition periods shown in the table below is generated.

After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code.

Number of times theInput prohibited time

incorrect code was input

 

1

—

2

5 minutes

3

1 hour

4

24 hours

In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.

Display

Setting

"BEEP ON"

Beep is heard.

"BEEP OFF"

Beep canceled.

In Standby mode

Manual Clock Adjustment

1Select Clock Adjustment modePush the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hours

Push the Control knob towards [FM] or [AM].

Adjust the minutes

Push the Control knob towards [4] or [¢].

4Exit Clock adjustment mode Press the [MENU] button.

English 17