<Registering to the Preset Dial Number List>
1.Operation is the same. Refer to the instruction manual of
2.Press the [FNC] button.
3.Select the number to memory by turning the Control knob.
4.Press the Control knob for at least 1 second.
<Deleting a Registered Cell-Phone>
4.Press the Control knob.
5.Select “YES” using the Control knob.
6.Press the Control knob.
7.Press the [FNC] button.
<Menu System>
For how to operate Menu, refer to <Function Control> in this instruction manual.
About display
Moreover, some displays are different from the description of
body during playback of the iPod source.
*The color of key illumination is only a recommended color by our campany. It does not necessarily match the body color of iPod.
Compatible iPod models:
iPod (5th generation), iPod classic, iPod touch, iPod nano (1st/2nd/3rd generation),
Fifth Generation iPod (iPod with video)
• | AMP |
| Selecting “OFF” turns off the |
| Turning off the |
| quality of the sound from Preout. |
• | Zone2 (Dual Zone) |
| Set the destination (front speaker “Front” or rear |
| speaker “Rear”) of the sub source (AUX IN) when the |
| Dual Zone function is turned on. |
• | Supreme |
| Technology to extrapolate and supplement with |
| proprietary algorithm, the |
| that is cut off when encoding at low bit rate (less |
| than 128Kbps, Sampling frequency is 44.1kHz). |
| Supplementing is optimized by compression |
| format (AAC, MP3 or WMA) and processed |
| according to bit rate. |
Displays of KCA-BT100 Instruction Manual
“Disconnect”
“Connect”
“Phone Delete”
“Phone Status”
Actual displays on this unit
“HF Disconnect”
“HF Connect”
“Device Delete”
“BT DVC Status”
The effect is negligible with music that is encoded |
at high bit rate, variable bit rate or has minimal high |
frequency range. |
• Chinese (Chinese language setting) |
When this is set to ON, the following character |
strings are displayed in Chinese: |
BT : Displays the bluetooth connection status. This indicator turns on when a
Menu Glossary
•SRC Select
Setting up the Source Select mode.
1 : Displays source icons for your choice.
2 : Allows you to select sources one after another.
•Display
If this unit is not operated at least 5 seconds with “OFF” selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse.
•ILM Dimmer (illumination dimmer) Reduces the key Illumination brightness.
AUTO: Dims the illumination in conjunction with the Light switch of the vehicle.
MNAL1/MNAL: Dims the illumination constantly.
MNAL2: Turns off the upper and lower illuminations, and dims the left and right illuminations.
OFF: Does not dim the illumination.
•AT COL CHG (Automatic illumination color change)
Selecting “iPod” changes the key illumination automatically according to the color of the iPod
Folder name/ File name/ Song title/ Artist name/ |
Album name/ |
• CD Read |
Sets the method for reading CD. |
When unable to play special format CD, set this |
function to “2” to force playing. Note that some |
music CD may be unplayable even when set to “2”. |
In addition, audio files cannot be played when set |
to “2”. Normally, keep this set to “1”. |
1 : Automatically distinguishes between audio file |
disc and music CD when playing disc. |
2 : Forces playing as music CD.
The marking of products using lasers (Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
English 21