English | 13
5 Select the Audio Control item for
adjustment
Press the [2] — [5] button.
Each time the [2] — [5] button is pressed the
adjustable audio items are switched among
ranges of all stage section’s tables on the
following pages.
6 Adjust the Audio Control item
Press the [4] or [¢] button.
Each time the button is pressed the setting
switches as shown below.
• The Adjustment item can also be controlled by the
rotary volume knob. Refer to 'Rotary Volume knob
operation mode select'(page 14).
7 Exit Audio Control mode
Press the [6] button.
• The loudness setting can also be adjusted by pressing
the [4] button.
• * This mode is available only when 'Subwoofer Output'
(page 14) is ON.
1st section
[2] button
Adjustment Item Display Range
Bass level "Bass" –8 — +8
[3] button
Adjustment Item Display Range
Middle level "Middle" –8 — +8
[4] button
Adjustment Item Display Range
Treble level "Treble" –8 — +8
[5] button
Adjustment Item Display Range
Subwoofer level "SW Level" –15 — +15
2nd section
[2] button
Adjustment Item Display Range
Front/Rear High Pass Filter "HPF" THRU/100/125/170 Hz
[3] button
Adjustment Item Display Range
Subwoofer Low Pass Filter "LPF SW" 50/80/120/THRU Hz
[4] button
Adjustment Item Display Range
Loudness "LOUD" ON/OFF
[5] button
Adjustment Item Display Range
Balance "Balance" L 15 — R 15
Fader "Fader" R 15 — F 15
• When the Dual Zone System is ON, the setting for the
High Pass Filter is nullified.
3rd section
[2] button
Adjustment Item Display Range
Volume offset "V-Offset" –8 — 0
• Volume offset: Each source’s volume can be set as a
difference from the basic volume.