Function of the KDC-X569/MP522/MPV622/MPV6022/X469/422/4022
Turning the Non-fading output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
When it’s ON, "NF ON" is displayed.

Non-fading Output

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Speaker Setting mode
Press the [System Q] button.
3Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Display
OFF "SP OFF"
For 5 & 4 in. speaker "SP 5/4Inch"/ "SP 5/4"
For 6 & 6x9 in. speaker "SP 6*9/6Inch"/ "SP 6*9/6"
For the OEM speaker "SP O.E.M."/ "SP OEM"
4Exit Speaker Setting mode
Press the [System Q] button.

Speaker Setting

When the bass extend is set to ON, low frequency response is
extended by 20%.
•Volume offset: Each source's volume can be set as a difference
from the basic volume.
Loudness: Compensating for low and high tones during low
volume.
•* Function of the KDC-X569/ X469
** Function of the KDC-X569/ MP522/ MPV622/ MPV6022/ X469/
422/ 4022
*** Function of the KDC-MP522/ MPV622/ MPV6022/ 422/ 4022
5Exit Audio Control mode
Press the [AUD] button.
— 11 —
KDC-X569_U.S r2 02.10.31 10:09 AM Page 11