22 | English
Menu system

Selectable Illumination

Selecting the button illumination color as green
or red.
Display Setting
"Color Red" The illumination color is red.
"Color Green" The illumination color is green.

Switching Display Type

Setting the Display type.
Display Setting
"DisplayC" Demonstration.
"DisplayA" Normal display type.
"DisplayB" Silent display type.

Function of the KDC-MPV7026

Illumination Color Setting

You can set the display to a desired color.
1 Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2 The color continues to change gradually
Hold down on the [4] or [¢] button.
Release your finger at the color you want.
• Colors adjusted using either [4] or [¢] will be
stored automatically, and they can be called by
pressing [5] button.
Quick call up the preset color
Press the desired [1] — [4] button.
Button Color
[1] Silky White
[2] Red
[3] Blue
[4] Blue Green
Selecting the Color mode
Press the [6] button.
Each time the button is pressed the Color mode
switches as shown below.
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every 6 hours.
Keeps the presently set color.
Blue fine adjustment
1 Press the [3] button for at least 2 seconds.
2 Press the [4] or [¢] button.
When the blue fine adjustment is completed,
press the [3] button.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"Contrast 0"
…
"Contrast 5" (Original setting)
…
"Contrast 10"

Dimmer

Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display Setting
"Dimmer ON" The display dims.
"Dimmer OFF" The display doesn’t dim.
In Standby mode

Switching preout

Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display Setting
"SWPRE Rear" Rear preout.
"SWPRE Sub-W" Subwoofer preout.