16 | English
General features

The text display in the Lower text display

part

In Tuner source
Information Display
KENWOOD Logo "LOGO"
Clock "CLOCK"
Spectrum Analyzer & Clock "S/ANA+CLOCK"
Radio text "R-TEXT"
Date "DATE"
In CD & External disc source
Information Display
KENWOOD Logo "LOGO"
Clock "CLOCK"
Spectrum Analyzer & Clock "S/ANA+CLOCK"
Disc title "DISC-TITLE"
Track Title "TRACK-TITLE"
Disc name "DNPS"
Date "DATE"
In MP3/WMA source
Information Display
KENWOOD Logo "LOGO"
Clock "CLOCK"
Spectrum Analyzer & Clock "S/ANA+CLOCK"
Song title & Artist name "TITLE/ARTIST"
Album name & Artist name "ALBUM/ARTIST"
Folder name "FOLDER NAME"
File name "FILE NAME"
Date "DATE"
In Standby
Information Display
KENWOOD Logo "LOGO"
Clock "CLOCK"
Date "DATE"
In Auxiliary input source
Information Display
KENWOOD Logo "LOGO"
Clock "CLOCK"
Spectrum Analyzer & Clock "S/ANA+CLOCK"
Date "DATE"
• If 'Dual Zone System' (page 24) is turned ON while the
spectrum analyzer is displayed, the spectrum analyzer
disappears from the display.
• If the Disc title, Track title, Song title & Artist name, or
Album name & Artist name is selected when the disc
which does not have Disc title, Track title, Song title,
Album name, or Artist name is played, Kenwood Logo
are displayed.

Display:A

Side Graphic Display Switching
Switching the Side graphic Display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [3]/ [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
2 Enter display control mode
Press the [3]/ [4] ("DISP") button.
3 Select the display mode
Press the [2] ("MODE") button.
Select the "Display:A" display.
4 Enter display control mode
Press the [4] ("SIDE") button.
"Side Graphic" is displayed.
5 Select the side graphic display
Press the [4] or [¢] button.
Each time the button is pressed the side graphic
display switches as shown below.
Side graphic display
Text + S ource
Graphic 1
…
Graphic 3
Spectrum analyzer 1
…
Spectrum analyzer 4
Blank
6 Exit display control mode
Press the [6] ("RTN") button.
• The setting of this function is available while "Display :
A" is selected for the Display mode.