English | 49
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display Setting
"DSI: ON" LED flashes.
"DSI: OFF" LED OFF.
Selectable Illumination
Selecting the button illumination color as green
or red.
Display Setting
"Button: Red" The illumination color is red.
"Button: Green" The illumination color is green.
Triangle indicator setting
Sets the blinking mode during triangle indicator
system adjustment (such as audio control, audio
setup, multi-key system setup).
Display Setting
"TRIAGL Blink:ON" The Triangle indicator blinks.
"TRIAGL Blink:OFF" The Triangle indicator does not blink.
Font Type Selec t
Selecting the display font.
1 Select Font Type Select Mode
Press the [FM] or [AM] button.
Select the "Font Select" display.
2 Select the font
Press the [4] or [¢] button.
Dimmer
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display Setting
"Dimmer: ON" The display dims.
"Dimmer: OFF" The display doesn’t dim.
OFF Wait Time Setting
Setting the time until the faceplate hide
operation starts after the power is turned OFF.
The faceplate can be removed only during the set
time period.
Display and Setting
"Off Wait : 0sec"
…
"Off Wait : 3sec" (Original setting)
…
"Off Wait : 25sec"
In Standby mode
Eject angle setting
This function sets the opening and closing
operation of a panel when a disc is inserted and
when it is ejected.
Display Setting
"Eject ANG: Slope" Opens and closes the panel while maintaining
the angle of the control panel to the set angle.
"Eject ANG: Level" Opens and closes the panel after setting the
angle of the control panel to the horizontal
position.