Kenwood KDC-7021, KDC-7021SE, KDC-B7021, KDC-V7521 7, 1, 2, 3, 4, 5, 6

Scrolling the displayed CD text or MD title.
Press the [DISP] button for at least 1 second.
Text/Title Scroll
7Exit name set mode
Press the [NAME.S] button.
•When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
•Media that you can attach names to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
•The name of a CD can be changed by the same operation you
used to name it.
Attaching a title to a CD.
1Play the disc you want to attach a name to
•A title can't be attached to a MD.
•Disc Naming can't be done during CD text display.
2Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3Move the cursor to the enter character position
Press the [4] or [¢] button.
4Select the character type
Press the [38] button.
Each time the button is pressed the character typed switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number button.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
6Repeat steps 3 through 5 and enter the name.
Disc Naming (DNPS)
CD/External disc control features
— 20 —
English
KDC-7021SE_U.S 02.11.24 6:58 PM Page 20