Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood KDC-7021, KDC-7021SE, KDC-B7021, KDC-V7521 Removing the Unit, Locking the faceplate to the unit

1 38

Download 38 pages, 1.65 Mb

— 33 —

1Insert the removal tool into the

indentations in the hard rubber

frame, and pull it gently until the

lock is released.

Accessory4

Removal tool

Screw (M4X8)

(commercially available)

4Push upward the removal tool

toward the top, and pull out the

unit halfway while pressing

towards the inside.

5Pull the unit all the way out

with your hands, being

careful not to drop it.

Be careful to avoid injury from the catch

pins on the removal tool.

2Remove the screw (M4×8)

on the back panel.

3Insert the two removal tools

deeply into the slots on each

side, as shown.

Accessory2

Removal tool

Removing the Unit

3Refer to the section "Removing the faceplate" (page 11) and

then reattaching the faceplate.

Never insert the taptite screws (ø2 X 4 mm) in any other screw holes

than the one specified. If you insert it in another hole, it will contract and

may cause damage to the mechanical parts inside the unit.

If you want to lock the faceplate to the unit so that it does not fall

off, follow the directions below.

1Refer to the function "Removing the faceplate" (page 11) and

remove the faceplate.

2Insert the provided screw into the hole at the center of the

bottom side of the faceplate which you have removed from the

unit.

Accessory5

Locking the faceplate to the unit

KDC-7021SE_U.S 02.11.24 6:58 PM Page 33

Contents

Main Contents Safety precautions To prevent injury and/or fire, take the following precautions: 2WARNING To prevent damage to the machine, take the following precautions: 2CAUTION IMPORTANT INFORMATION Safety precautions Cleaning the Faceplate Terminals Cleaning the Unit Cleaning the CD Slot About RDS CLASS 1 LASER PRODUCT RDS (Radio Data System) Enhanced Other Network Alarm About CDs Handling CDs When using a new CD CD accessories CD cleaning Power Volume Attenuator 1 Selecting the Source 2 Loudness System Q 1 Speaker Setting 2 3 4 1 2 3 4 Audio Control 1 Switching Clock Display 2 3 4 1 2 1 2 Theft Deterrent Faceplate 1 Tuner features Page 1 2 3 Traffic Information Presetting Volume for Traffic Information RDS features 3 4 1 2 PTY (Program Type) RDS features 1 Playing CD 2 1 2 1 Playing External Disc Album Search (Function of disc changer) Fast Forwarding and Reversing Direct Track Search (Function of remote) 1 2 Text/Title Scroll 7 Disc Naming (DNPS) 1 2 3 1 2 DNPP (Disc Name Preset Play) (Function of Remote) 1 Menu System 2 Mask Key 3 1 2 3 4 Switching Graphic Display 1 2 3 1 2 OFF Wait Time Setting Illumination Color Setting Contrast Adjustment 1 2 News Bulletin with Timeout Setting System Q B.M.S. (Bass Management System) Restricting RDS Region (Region Restrict Function) Local Seek <In Tuner mode> Tuning Mode <In Tuner mode> Auto Memory Entry <In Tuner mode> AF (Alternative Frequency) Power OFF Timer Auto TP Seek Text Scroll <In Tuner/External disc control mode> Monaural Reception <In FM reception> Basic Operations of remote + In Disc source In Tuner source 1 3 4 Accessories Installation Procedure Connector Function Guide Connecting Cables to Terminals Connecting Cables to Terminals Installtion 1 4 5 2 Removing the Unit Locking the faceplate to the unit 3 1 2 Troubleshooting Guide ? Tuner source ? Troubleshooting Guide Disc source ? If the following situations, consult your nearest service center: The messages shown below display your systems condition. Specifications Specifications subject to change without notice. FM tuner section MW tuner section LW tuner section