Kenwood KDC-W241, KDC-W312 Auxiliary Input Display Setting, Demonstration mode Setting, Display, Setting, 2Enter Menu mode, 2Set the Demonstration mode, 1Select the Demonstration mode

⁄

•You can do this adjustment when the “SYNC” is set as “OFF”.

Auxiliary Input Display Setting

Selecting the display when changing to Auxiliary input source.

1Select Auxiliary input source Press the [SRC] button. Select the “AUX” display.

2Enter Menu mode

Press the [B.BOOST] button for at least 1 second.

“MENU” is displayed.

3Select Auxiliary input display setting mode Press the top or bottom side of the Control knob.

Select the “NAME SET” display.

4Enter Auxiliary input display setting mode Press the center of the Control knob for at least 1 second.

The presently selected Auxiliary input display is displayed.

5Select the Auxiliary input display

Press the right or left side of the Control knob. Each time you push the knob, the display alternates as listed below.

•“AUX”

•“DVD”

•“PORTABLE”

•“GAME”

•“VIDEO”

•“TV”

6Exit Auxiliary input display setting mode Press the [B.BOOST] button.

⁄

•When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.

Demonstration mode Setting

Sets the demonstration mode.

1Select the Demonstration mode

Press the top or bottom side of the Control knob.

Select the “DEMO” display.

2Set the Demonstration modePress the center of the Control knob for at least 2 seconds.

Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below.

Display	Setting
“DEMO ON”	The Demonstration mode function is ON.
“DEMO OFF”	Exit Demonstration mode (Normal mode).

English 11