Connecting Wires to Terminals
USB connector | • Do not remove the cap when you do not use the USB | |||||
|
|
|
|
|
| cable. The connector will cause the unit to malfunction if |
|
|
|
|
| To USB device | it gets in touch with any metallic part of the vehicle. |
|
|
|
|
| ||
|
|
|
|
|
|
|
Front left output (White)
Front right output (Red)
Sub Woofer right output (Red)
Rear left output (White) Rear right output (Red)
SUB WOOFER
Sub Woofer left output (White)
FM/AM antenna input
To connect these leads, refer to the relevant instruction manuals.
To Kenwood disc changer/ External optional accessory
Fuse (10A)
If no connections are made, do not let the wire come out from the tab. | Wiring harness |
(Accessory1) |
When using the optional power amplifier, connect to its power control terminal.
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the
Connect to the terminal that is grounded when either the telephone rings or during conversation.
To connect the Kenwood navigation system, consult your navigation manual.
To car light control switch
To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.
Power control wire (Blue/White)
P.CONT
Motor antenna control wire (Blue)
ANT.
CONT
TEL mute wire (Brown)
MUTE
Dimmer control wire (Orange / White)
ILLUMI
External amplifier control wire (Pink/Black)
EXT.
CONT
To front left speaker | White/Black | FRONT L | |
|
| White | |
|
|
| |
To front right speaker | Gray/Black | FRONT R | |
|
| Gray | |
|
|
| |
To rear left speaker | Green/Black | REAR L | |
|
| Green | |
|
|
| |
To rear right speaker | Purple/Black | REAR R | |
|
| Purple | |
|
|
| |
Ignition key switch | Car fuse box |
| |
|
| ACC | Ignition wire (Red) |
Car fuse box |
|
| Battery wire (Yellow) |
|
|
| |
(Main fuse) |
|
|
|
Ground wire (Black) - (To car chassis)
Battery + | – |
36 English