Audio Preset Memory
Registering the value setup by Sound Control.
1Setup Sound Control
Refer to the following operations to setup the Sound Control.
-Cabin selection (Page 25)
-Speaker Setting (Page 25)
-DTA (Digital Time Alignment) setting (Page 26)
-X’Over setting (Page 26)
-Manual Equalizer Control (Page 27)
-Preset position selection (Page 28)
-Manual position setting (Page 28)
2Enter Audio preset memory mode Select “SOUND” > “Preset” > “Memory”.
For how to select Function Control items, refer to <Function Control> (page 6).
3Select the number to put in the memory Turn the Control knob and push the center when the desired number is displayed.
4Turn the Control knob to select “YES”, and then press the Control knob.
“Memory Completed” is displayed.
5Exit Audio preset memory mode Press the [FNC] button.
⁄
•Register 6 pairs of Audio Preset Memory.
•Number “1”: When you press the Reset, all the sources will be the setting value which is registered.
•Number “1” and “2”:
The memory cannot be erased by the Reset button.
•This function cannot be registered when the iPod Equalizer set in <Preset Equalizer curve select> (Page 27).
Audio Preset Recall
Recalling the sound setup registered by <Audio Preset Memory> (Page 29).
1Select the source Press the [SRC] button.
2Enter Audio preset recall mode Select “SOUND” > “Preset” > “Recall”.
For how to select Function Control items, refer to <Function Control> (page 6).
3Select the number to recall in the memory Turn the Control knob and push the center when the desired number is displayed.
4Turn the Control knob to select “YES”, and then press the Control knob.
“Recall Completed” is displayed.
5Exit Audio preset recall mode Press the [FNC] button.
⁄
•The “User” of <Preset Equalizer curve select> (Page 27) is changed to the value which was recalled.
•The Equalizer curve is changed to the value which was recalled by the selected source.
English 29