Removing operation panel
Removes the operation panel.
1Open the operation panel
2Remove the operation panel
Antitheft warning lamp
•Removing the panel turns off the power.
•Since the panel is a precision component, it may be damaged by shock when exposed to vibration or dropped. Store the panel with care after removing it.
•Do not store the removed panel in the following places.
-Places exposed to direct sun light
-Places with high humidity
-Dusty places
•This unit is provided with a DSI (Security indicator) function. If the "DSI" feature is set to "ON" in the <Menu setup> (page 44), a warning lamp blinks when the panel is removed for antitheft purposes.
Installing operation panel
Installs the operation panel.
1Align the operation panel with the main unit
Push in the panel aligning the hole in the panel with the shaft at the right of the main unit.
2Install the operation panel
Push the left side of the panel into the main unit until it locks.
The panel is now installed and the unit is ready
for use. ControlDisplay
English 43