Display | Setting | Setting overview | Source |
|
|
|
|
"P/N"** | PAL*/NTSC | Switch between the signal |
|
|
| systems (PAL/NTSC) of the on- |
|
|
| screen display. |
|
|
| Select the same signal system |
|
|
| as that used for the monitor |
|
|
| connected to this unit. |
|
|
|
|
|
"A- | Refer to | Registers/recalls audio settings. |
|
PRESET" | page 50 |
|
|
"M/V" | No setting is | Displays Macrovision version. |
|
| available |
|
|
*Indicates the default configuration after purchase.
**This setting is for
: Can be set in standby state.
: Can be set in other than standby state.
: Can be set while accessing DVD source.
: Can be set during FM reception.
: Can be set while accessing AUX/AUX EXT source.
Exit menu mode
VOL |
|
|
|
|
|
|
|
|
AUD |
|
|
|
|
|
|
| DISP |
|
| M/S |
|
|
| AM SW |
| |
SETUP | Q MENU | STOP | SCAN | RDM | REP | F.SEL | M.RDM |
|
|
|
|
|
|
|
| SRC | OFF |
•"ZONE2" is displayed while the dual zone function is set to ON.
•"SWPRE" is displayed when dual zone function is turned OFF.
•"CD READ"/"P/N" can be set while no disc is inserted in the unit.
•For further information on each feature, refer to <Help? Term> (page 64).
•Changing "SWPRE" setting will change the "AVOUT" setting value of <Audio setup> (page 37) to
•About the Signal Systems of the Video Disc and Monitor
If the signal system (PAL/NTSC) used for the video disc is different from that used for the monitor connected to this unit, no image can be displayed on the monitor.
#: Press for # seconds.
Menu
English 45