Connecting Wires to Terminals

 

Cigarette Lighter Plug

Digital output

Power Cable 1

To Cigarette

Video output (Yellow)

Lighter Socket

Fuse (5A) built in

 

Audio left output (White)

 

Audio right output (Red)

 

DVD Player back view

 

TV Monitor

 

(Optional Accessory)

 

AV Cable 7

Remote Control Sensor 2

Attaching Remote Control Sensor

1 Remove the backing paper from the Velcro tape on the back of the Remote Control Sensor.

2 After wiping off the dirt or oil from the attachment location,

Backing paper

attach the Remote Control Sensor.

 

⁄

•Make sure that the Remote Control Sensor plug is firmly inserted. If the connection is inadequate, the unit cannot be remote-controlled.

• Wipe off the dirt or oil from the surface to which the Sensor is attached.

• Avoid locations under direct sunlight or near the TV monitor where signals from the remote controller are not received easily.

• You can change the direction of the remote control sensor cable.

¤

• Connect the power cable 1 to the DVD player first, and connect it to the cigarette lighter socket last. Connecting it to the cigarette lighter socket first may blow the fuse.

English 21