MD/External disc control features

English

Magazine Random Play

(Function of disc changers)

Play the tracks on all the discs in the disc changer in random order.

1Press the M.RDM button to switch magazine random play on and off.

"M-Random ON" is displayed when magazine random play is turned on.

The disc and track numbers will change over and over in the display as the next track is being selected.

When the disc/track has been selected, play will begin. The selected disc/ track number blinks in the display as it is being played.

NOTE

This function is not available with the following models: KDC-C200/C300/C400/C301/C401

2To change the track being heard, press the ¢ button. Another disc/track will be selected and played.

NOTE

•Magazine random play is canceled when you eject the disc.

•The time needed for random selection depends on the number of discs loaded in the disc magazine.

Text / Title Scroll

This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu.

To scroll automatically:

Press the CLK button to display the disc title or the track title. The display of the text will be scrolled repeatedly.

To scroll manually:

1Press the CLK button to display the disc title or the track title.

2Pressing the CLK button for at least one second results in one scrolling display of the titles.

NOTE

•Please see the menu settings (page 21) about switching between manual scrolling and automatic scrolling.

•You cannot use the text scroll function during magazine random play.

Presetting Disc Names (DNPS)(Function of disc changers)

Store the names of discs to be displayed when played.

1Play the disc whose name you want to preset.

NOTE

•This function is not available for disc changers that do not feature the Disc Name Preset function.

•This procedure is not to be used to store the disc and track titles for MDs that you record.

•The disc name preset function cannot be used when a disc title name or track title is displayed.

2Press the NAME.S button for at least two seconds.

"NAME SET" is displayed and the disc name preset mode is entered.

The cursor blinks in the position where character input can be made.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

4Each time the AUTO button is pressed, the characters to be entered change as listed below.

Press the DISC+ or DISC– button to display the desired character.

Characters that can be displayed are as follows.

— 16 —