English

Troubleshooting Guide

MD/External disc control mode

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

The MD cannot be inserted.

There is already an MD loaded.

Eject the currently loaded MD and then load the new

 

 

one.

 

 

 

 

The MD does not load.

The insertion orientation of the MD is incorrect or the MD

Insert the MD in the proper orientation.

 

is upside down.

 

 

 

 

 

 

The MD loads but soon comes

Nothing is recorded on the MD.

Switch the MD for one that is recorded.

out again.

 

 

 

 

 

 

 

The sound skips.

The mounting angle exceeds 30°.

Adjust to an angle of less than 30°.

 

 

 

 

The mounting is unstable.

Anchor the unit securely. When the sound skips at the

 

 

same portion even when the car is stopped, the problem

 

 

lies with the MD.

 

 

 

There is noise during playback.

The MD is soiled with dust or dirt.

If another MD is played back and there is no problem, then

 

 

the problem is due to the sound quality of the MD itself.

 

 

 

A track will not play.

Random play has been selected.

Turn off random play.

 

 

 

The disc control mode cannot

No wire has been connected to the disc changer input

Connect the wire to the disc changer input terminal on

be selected.

terminal on the unit.

the unit.

 

 

 

 

The specified disc does not

The specified CD is quite dirty.

Clean the CD.

play, but another one plays

 

 

 

The CD is upside-down.

Load the CD with the labeled side up.

instead.

 

 

 

 

 

The disc is loaded in a different slot from that specified.

Eject the disc magazine and check the number for the

 

 

specified disc.

 

 

 

 

 

The disc is severely scratched.

Try another disc instead.

 

 

 

 

The sound skips.

Something is touching the disc changer.

Remove whatever is touching it.

 

 

 

 

 

The CD is scratched or dirty.

If skipping happens at the same place when the car is

 

 

stopped, something with the CD is wrong. Clean the

 

 

CD.

 

 

 

 

— 28 —