Adjust the time manually.
This adjustment is available only when the automatic time
adjustment is set to off. (page 32)
Display and setting:
Select the display "Clock Adjust" during the selecting function
in the menu system.
Hold down either the 4or ¢button for two seconds or
more to enter the Manual time adjustment mode.
The time display will blink.
•Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
•Adjusting the minutes
Press the ¢button to advance the minutes, or press the
4button to make the minutes go back.
3
2
1
NOTE
Manual Time Adjustment
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Display and setting:
"Beep ON" : Beep setting is on.
"Beep OFF" : Beep setting is off.
The beep sound is not output from the preout jacks.
NOTE
Touch Sensor Tone
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
News Bulletin function with PTY news timeout setting, and the
Alarm function.
You can set the defaults for additional functions in the menu
mode.
Make a setting for each function, referring to the following
operations.

Enter the menu mode

Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.

Selecting function to set

Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions backward.
Example: If you want to switch the tuning mode from AUTO1
to manual, first search through the functions until
you see "Auto 1" in the display.

Changing setting for currently displayed function

Press either the 4or ¢button.
The setting will change for each function.
Example: The tuning mode will switch from AUTO 1 to AUTO
2. Pressing the button again switches the setting to
manual, and "Manual" is displayed.

Ending the menu mode

Press the MENU button.
Make sure to end the menu mode when finished.
NOTE
4
3
2
1
Menu System
Menu settings
— 30 —
English