Kenwood KMM-100, KMM-100U AUDIO SETTINGS

ENGLISH |

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select

[AUDIO CTRL]

, then press the knob.

3 Turn the volume knob to make a selection (see the following table), then press the knob.

Repeat step 3 until the desired item is selected or activated.

4 Press and hold to exit.

(or using RC-406)

1 Press AUD to enter

[AUDIO CTRL]

2 Press 5/∞ to make a selection, then press ENT 38.

• To return to the previous hierarchy, press .

Default:

SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.

BASS LEVEL –8 to +8 (0):

Adjusts the level to memorize for each source. (Before making an adjustment,

select the source you want to adjust.)

MID LEVEL –8 to +8 (0):

TRE LEVEL –8 to +8 (0):

PRESET EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects a preset equalizer

suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble settings.)

BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level. ;

OFF: Cancels.

LOUDNESS LOUD LV1/ LOUD LV2: Selects your preferred low and high frequencies boost to produce a well-

balanced sound at a low volume level. ; OFF: Cancels.

BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.

FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.

SUB-W SET ON: Turns on the subwoofer output. ; OFF: Cancels.

DETAIL SET

LPF SUB-W THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Audio signals with

frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer.

SUB-W

PHASE

REV (180°)/ NORM (0°): Selects the phase of the subwoofer output to be in line with the speaker

output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for

[LPF SUB-W].)

SUPREME

SET

ON: Creates realistic sound by interpolating the high-frequency components that are lost in audio

compression. ; OFF: Cancels. (Selectable only when playing back a USB device.)

VOL OFFSET

(Default: 0)

–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each source.

(Before adjustment, select the source you want to adjust.)

•

[SUB-W LEVEL]

[SUB-W SET]

[LPF SUB-W]

[SUB-W PHASE]

is selectable only if

[SWITCH PRE]

is set to

[SUB-W]

. (➜

)

•