Kenwood KNA-DV3200 - page 26

26 English
English
Route Options
Route Preferences
The function allows settings to be made for the roads to be used and to start route calculation.
1Each time a button is selected it will toggle between usage
and non-usage of the corresponding roads or ferries.
2Select .
• can be selected during route guidance.
• The route will not necessarily follow the specified conditions.
Destination & Way Points
The destination or way points used in route calculation can be changed using this function.
■ Addition of way points
The following procedure can be used to add new way points to the current route for calculation.
1Select .
2Set the way point using your preferred method.
When a new destination is set by (Destination), it will replace
the current destination and route calculation will be carried out once
again.
3When the required way points have been setup, indicate
the order in which they are to be visited.
Choose the location to be added, and then select .
4Select .
• When a new destination is set by (Destination), it will replace the current destination and route calculation
will be carried out once again.
• Step 3 is required when setting the 2nd way point and more after.
• Repeat step 1 and 3 until all desired way points have been set.
3(Route Options) 3(Route Pref.)
Before Steps
3(Route Options) 3(Dest. & Way Pt.)
Before Steps
KNA-DV3200(E)_ENG r2.1 04.7.23 4:32 PM Page 26