3Install Bracket (Accessory 6).

When using spacer (Accessory 5)

Accessory! (Ø4 X 16.5)

When not using spacer (Accessory 5)

Accessory@ (Ø4 X 4.5)

You can also install it using a double-sided tape (Accessory ~)

When using spacer (Accessory 5)

Accessory#

When not using spacer (Accessory 5)

Accessory#

⁄

•Install the controller using the screws (Accessory-/=) when it cannot be secured firmly using the double-sided tape.

•Thoroughly wipe away and dust or grease from the installation location using a cloth which has been soaked in a neutral cleaning agent and wrung out. Attach after allowing the installation location to dry.

•Do not attach the double-sided tape more than once or touch the adhesive with your fingers as this will weaken its adhesive strength.

•If the temperature of the surface of the installation location is low, warm it up using a heater or other means before attaching the stand. Low temperature may weaken the adhesive the double-sided tape.

4Install the controller to bracket (Accessory 6).

Controller

Accessory6

⁄

•When you remove the controller from bracket (Accessory 6), turn the controller while pressing the release button.

Release button

English 37