Setting up the system
1 6 Preparing the remote control
Loading the batteries
1 Remove the cover. | 2 Insert the batteries. | 3 Close the cover. |
Preparations
Notes
•Insert four
1.The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks.
2.Replace all four batteries with new ones when you notice a shortening of the distance from which the remote control will operate or if the remote control blinks 5 times when you push a key. The remote control is designed to retain set up codes in memory while you change batteries.
3.Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction. In such a case, change the location of the system installation to prevent malfunction.
Operating distance
This remote control has two IR emitters: one to send commands in a straight line over long distances, allowing you to control the receiver and your other components from farther away; and one for wide dispersion of commands in a closer proximity, for near- field operation even when the remote control is not pointed directly at the respective component.
Remote sensor
6 m
10 m
30˚ 30˚
Model: