Manuals / Brands / Home Audio / Cassette Player / Kenwood / Home Audio / Cassette Player

Kenwood KRC-177RA, KRC-177RG Installation, ■Removing the Unit, ■Removing the hard rubber frame

1 24

Download 24 pages, 459.73 Kb

English

Installation

■Removing the hard rubber frame

1Engage the catch pins on the removal tool and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Catch

Lock

Accessory2

Removal tool

2When the lower level is removed, remove the upper two loca- tions.

■Removing the Unit

1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

2Remove the screw (M4⋅8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Screw (M4X8)
(commercially
available)	Catch facing up

4Lower the removal tool toward the bottom, and pull

out the unit halfway whilst pressing towards the inside.

NOTE

The frame can be removed from the top side in the same man- ner.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being care-

ful not to drop it.

— 22 —

Contents

© B64-1316-00(EW) English Before use Buttons and Display Basic operations Tuner features 2WARNING2CAUTION To prevent injury and/or fire, take the following precautions: •Make sure not to get your fingers caught between the faceplate and the unit •Be careful not to drop the unit or subject it to strong shock The unit may break or crack because it con- tains glass parts NOTE Reset button Cleaning the Unit 2CAUTION Cleaning the Faceplate Terminals LOUD indicator ATT indicator LO.S indicator Frequency MONO indicator REG indicator EON indicator TA indicator PTY indicator NEWS indicator Clock display Power Volume Turning on the power: Increasing Volume: Decreasing Volume: Menu System 2Selecting function to set Changing setting for currently displayed function 4Ending the menu mode Press the MENU button Function Selecting Tuning Mode Local Seek Function Select which tuning mode — auto seek or manual — to use as With the local seek function turned on, auto seek tuning skips the default Station Preset Memory 1Select the band/ station that you want to have stored Hold down the button Recalling a Preset Station: Auto Memory Entry RDS (Radio Data System) AF (Alternative Frequency) Function EON (Enhanced Other Network) Alarm Restricting RDS Region (Region Restrict Function) 3Switching settings Press either the AM button or FM button. The display and setting will change 4Press the MENU button to end the menu mode Traffic Information Function Turning TI function On/Off: Presetting Volume for Traffic Information/News Preset the volume level to be used for traffic information and news broadcasts 1Tune into the station for which you want to set the volume 2Adjust the volume to the desired level Future traffic information/news broadcasts are heard at the preset level Programme Type (PTY) Function Selecting Type of Programme to be Received: 4Select the type of programme to be received 5Seeking the selected programme type Switching to Other Stations with the Same Type of Programme: Playing Cassette Tapes Tuner Call Function Loading and Playing Cassettes: Switch automatically to the tuner whilst you are rewinding or fast forwarding the tape Audio Control Setting Adjust various parameters of sound quality Clock Display Display the time Switching to Time Display: DSI (Disabled System Indicator) Turning Disabled System Indicator On/Off: Reattaching Faceplate: Theft Deterrent Faceplate Removing Faceplate: Accessories External view Number of items Installation Procedure Connecting Cables to Terminals Connector Function Guide Cable Colour Functions External Power Connecting the ISO Connector (see p.20) (Default setting) The ■Installation Screw(M4 ⋅ 8) Unit ■Removing the hard rubber frame ■Removing the Unit Troubleshooting Guide PROBLEM POSSIBLE CAUSE SOLUTION Specifications subject to change without notice. FM tuner section Frequency range (50 kHz Space) 87.5 MHz – 108.0 MHz 0.7 µV/75 Ω 1.6 µV/75 Ω