1Select the source for adjustment
Press the [SRC] button.
2Enter Audio Control mode
Press the [AUD] button.
3Select the Audio item for adjustment
Press the [FM] or [AM] button.
Audio Control
2Enter Control mode
Press the [AUD] button.
3Select the Audio item for adjustment
Press the [FM] or [AM] button.
Select the "DB " display.
4Select the Sound type
Press the [#1] —[#5] button.
Press button Sound setting Display
[#1] Flat "DB FLAT"
[#2] Rock "DB ROCK"
[#3] Pops "DB POPS"
[#4] Jazz "DB JAZZ"
[#5] Easy "DB EASY"
When the dB(Sound Coordinate) setting is changed, the Bass and
Treble set in audio control replace the dB(Sound Coordinate) values.
5Exit Control mode
Press the [AUD] button.
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it’s ON, "LOUD" indicator is ON.
Loudness
Press the [SRC] button.
Source required Display
Tuner "TUNER"
Tape "TAPE"
External disc (KRC-291/ 26 only) "DISC"
Standby (Illumination only mode) "ALL OFF"
This unit automatically turns full power OFF after 20 minutes lapses
in Standby mode in order to save the vehicles battery.
The time until full power OFF can be set in <Power OFF Timer>
(page 18).
Selecting the Source
General features
— 6—
English
You can recall the best sound setting preset for different types of
the music.
1Select the source to set
Press the [SRC] button.
dB (Sound Coordinate)
KRC-291(E)_U.S_r3 01.10.2 4:46 PM Page 6