Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Kenwood KRC-33R, KRC-378R, KRC-478R, KRC-478RV ■Removing the Unit, ■Removing the hard rubber frame

1 36

Download 36 pages, 418.72 Kb

Installation

■Removing the hard rubber frame

1Engage the catch pins on the removal tool and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Catch

Lock

Accessory2 Removal tool

2When the lower level is removed, remove the upper two locations.

■Removing the Unit

1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

2Remove the screw (M4⋅8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Screw (M4X8) Catch facing up (commercially

available)

Accessory2 Removal tool

4Lower the removal tool toward the bottom, and pull

out the unit halfway whilst pressing towards the inside.

NOTE

The frame can be removed from the top side in the same manner.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being

careful not to drop it.

— 31 —

Contents

Page English Before use General features External disc control features Fast Forwarding and Reversing Disc Play 2WARNING To prevent injury and/or fire, take the following precautions: •Make sure not to get your fingers caught between the faceplate and the unit •Be careful not to drop the unit or subject it to strong shock The unit may break or crack because it contains glass parts Reset button Power Turning on the power: Turning off the power: Volume Increasing Volume: Switching Modes Switching Modes: Selecting the standby mode: Attenuator Turning Attenuator On/Off: 3Adjust each mode "BAS" : Adjust the bass level "TRE" : Adjust the treble level "BAL" : Adjust the balance level. Setting values: Left 15 – Right "FAD" : Adjust the fader level. Setting values: Front 15 – Rear TEL Mute When the telephone rings: Restoring Original Unit Source During Phone Call: Turning TEL Mute Function Off After Phone Call: Hang the phone up Reattaching Faceplate: Tuning Station Preset Memory Recalling a Preset Station: Displaying Frequencies: RDS (Radio Data System) Enhanced Other Network Alarm Traffic Information Function Turning TI function On/Off: Presetting Volume for Traffic Information/News Programme Type (PTY) Function 2Select the type of programme to be received 3Seeking the selected programme type Cancelling Programme Type Function During Its Operation: Tape indicator Playing Cassette Tapes Loading and Playing Cassettes: Playing Cassettes Already Loaded: Listening to the other side: Stopping and Ejecting Cassettes: Music Repeat Turning Music Repeat Function On/Off: Cancelling Music Repeat Function: "N"-operation: "O"-operation: Pausing and Restarting Disc Play: Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Making a Forward Track Search: Disc Search Making a Reverse Disc Search: Making a Forward Disc Search: Track / Disc Repeat Disc Scan Starting the disc scan: Stopping to Listen to the Disc Being Scanned: Random Play Magazine Random Play To scroll automatically: Presetting Disc Names Switching Display for Discs Switching Display for Discs: Menu System Touch Sensor Tone Display and setting: 1 Enter the menu mode 2Selecting function to set Adjusting Time Automatically: Disabled System Indicator (DSI) Selectable Illumination News Bulletin Function with PTY News Timeout Setting Selecting Tuning Mode Auto Memory Entry Cancelling Auto Memory Entry During Its Operation: AF (Alternative Frequency) Function Restricting RDS Region (Region Restrict Function) Auto TP Seek Function Monaural Reception Text Scroll Accessories External view Number of items Installation Procedure Connecting Cables to Terminals ■ISO connector unsupported car (KRC-478R/378R/33Ronly) When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear ■ISO connector supported car ■Power Control Terminal Connections ■Connector Function Guide Connector B Connector A ■Plug Setting ■Installation ■Removing the hard rubber frame ■Removing the Unit Troubleshooting Guide PROBLEM POSSIBLE CAUSE SOLUTION External disc control mode If the following situations, consult your nearest service centre: Even though no device EJECT ]Load the disc magazine properly No CD in the unit ]Insert the CD NO DISC Specifications Specifications subject to change without notice FM tuner section Frequency range (50 kHz Space) 87.5 MHz – 108.0 MHz