English
2CAUTION
When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal.
2WARNING
Antenna Conversion Adaptor
Antenna Cord (ISO) | |
| Front right output (Red) |
FRONT | |
Front left output (White) | |
| |
Power Control terminal | Fuse (10A) |
(P31) | Plug (P.32) |
| |
FM/AM antenna | KENWOOD disc changer |
input | / DAB control input |
If you connect the ignition cable (red) and the battery cable (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those cables to the power source running through
NOTE
To connect the Disc changer or DAB unit, consult each manual.
| the fuse box. | Rear left output (White) |
|
|
| |
If no connections are made, do not cut the tube off from | Rear right output (Red) | ||||
the edge of the cable. |
| ||||
|
|
|
|
| |
Connect either to the power control terminal |
| Wiring harness | |||
| (Accessory1) | ||||
when using the optional power amplifier, or to |
| ||||
the antenna control terminal in the vehicle. | P.CONT.OUT Power control/ Motor antenna | ||||
TEL mute terminal
| White/Black | – |
| |
FRONT • L | + |
| White |
|
NOTE
To connect the KENWOOD navigation system, consult your navigation manual.
To front left speaker| Ignition key |
| ANT. | control cable (Blue/White) |
| CONT. |
| |
| switch | ACC |
|
|
|
|
| |
| Car fuse box |
| Ignition cable (Red) |
| Car fuse |
|
|
|
| box |
|
| Battery cable (Yellow) |
| (Main |
|
|
|
| fuse) |
|
|
|
| Battery + | – |
|
| Gray/Black | – | To front right |
| ||
|
| |
FRONT • R | + speaker | |
| Gray |
|
|
| Green/Black | – | To rear left |
| ||
REAR • L | + speaker | |
| Green |
|
|
| Purple/Black | – | To rear right |
| ||
|
| |
REAR • R | + speaker | |
| Purple |
|
|
— 30 —