Selecting the display when this device is switched to Auxiliary
input source.
1Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
2Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2 seconds.
The presently selected AUX Name is displayed.
Auxiliary Input Display Setting
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
6Repeat steps 3 through 5 and enter the name.
7Exit name set mode
Press the [NAME.S] button.
•When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
•Memory numbers
- FM: 32 stations
- AM: 16 stations
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
•The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1Receive/play the station/disc you want to attach a title to
•A title can't be attached to a MD.
•Disc Naming can't be done during CD text display.
2Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3Move the cursor to the enter character position
Press the [4] or [¢] button.
4Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5Select the characters
Press the [FM] or [AM] button.
Station/Disc Naming (SNPS/DNPS)
Switching the displayed information.
Press the [CLK] button.
Each time the button is pressed it switches between clock
display and current source.
During clock display the clock indicator is ON.
Switching Clock Display
General features
— 8—
English
KRC-535_U.S 01.10.26 5:38 PM Page 8