You can set the defaults for additional functions in the menu
mode.
Make a setting for each function, referring to the following
operations.
Enter the menu mode
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see “Beep/BEEP ON” in the
display.
Changing setting for currently displayed function
Press either the 4or ¢button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and “Beep/BEEP OFF” is displayed.
Ending the menu mode
Press the MENU button.
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function and
the Alarm function.
NOTE
4
3
2
1
Menu SystemMenu settings
— 25 —
Menu display AUTO indicator
DISC
PROG/PTY
DAB
EJECT
PWR
OFF
TI
LOUD
VOL ADJ
MENU DISP
NAME.S
SCANB NR B.S/RDM REP D.SCN MTL/M.RDM
DISC
¢
¢
FM/
DISC+ SRC
AM/
DISC-
DISP
MENU
AUDAUD
#1-4
38
KRC-578R
KRC-678R/678RV
Menu display
™
indicator
™