Adjusting the display contrast.
Display and Setting
"Contrast 0"
"Contrast 5" (Original setting)
"Contrast 10"
… …
Contrast Adjustment
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every six hours.
Keeps the presently set color.
Blue fine adjustment
1 Press the [#3] button for at least 2 seconds.
2 Press the [4] or [¢] button.
When the blue fine adjustment is completed, press the [#3]
button.
The set color memory
Press the [#5] button for at least 2 seconds.
When the setting in the memory is called up press the [#5]
button.
The blue fine adjustment setting cannot be stored in memory.
Function of the KRC-V791
You can set the display to a desired color.
1Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2The color continues to change gradually
Continue pressing the [4] or [¢] button.
Release your finger at the color you want.
Quick call up the preset color
Press the [#1] — [#4] button.
Button Color
[#1] Silky White
[#2] Red
[#3] Blue
[#4] Blue Green
Selecting the Color mode
Press the [#6] button.
Each time the button is pressed the Color mode switches as
shown below.
Illumination Color Setting
Setting the graphic part display ON/OFF.
Display Setting
"Graphic ON" The graphic part is displayed.
"Graphic OFF" The graphic part isn't displayed.
Switching Graphic Display
Menu system
— 26—
English
KRC-791_U.S 01.10.29 11:54 AM Page 26