14 EN
ENGLISH
1
Turn on the power to this receiver by pressing POWER ON/OFF
and ON/STANDBY or POWER key.
2
Press the SETUP key to enter the SETUP mode and use the
MULTI CONTROL knob or MULTI CONTROL
%
/
fi
keys for the
following displays.
1SP SETUP
2TESTTONE
3DISTANCE
4LFE LVL
5EXIT
The flow of the SETUP is as follows;
SP SETUP TESTTONE DISTANCE LFE LEVEL EXIT
Front Left
Center
Front Right
Surround Right
Surround Left
Surround Back Right
Surround Back Left
Subwoofer
SP System
L
C
R
RS
RB
LB
LS
SW
L
C
R
RS
RB
LB
LS
SW
MANUAL
AUTO
2Way 2Speaker
Full Range
2Way 3Speaker
Custom
Subwoofer
Front
Center
Surround
Surround Back
Subwoofer Re-mix
4
Select a speaker system.
1Select SP SETUP and press the SETUP key again so that the
speaker system indication “SP SYSTEM” scrolls across the
display.
Preparing for surround sound
Speaker settings
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (Subwoofer, Front,
Center, Surround and Surround Back speakers) as described below.
2Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys
to select the speaker system setting.
1CUSTOM : For general speakers.
2FULL RANGE : For selected KENWOOD speaker - for example,
KS-207HT, KS-207EX, KS-208HT.
32WAY 2SPKR : For selected KENWOOD speaker - for example,
KS-307HT, KS-308HT, KS-308EX.
42WAY 3SPKR : For selected KENWOOD speaker - for example,
KS-707EX.
•The selection of 2WAY 2SPKR or 2WAY 3SPKR should only be
used with 6 channels speaker system setting.
•When the setting 2WAY 2SPKR or 2WAY 3SPKR is selected, the
procedure skips to step 4.
3For general speaker setting, use the MULTI CONTROL knob or
MULTI CONTROL %/fi keys to select CUSTOM and press the
SETUP key again.
•The subwoofer setting indication “SUBW ON” appears.
4Use the MULTI CONTROL knob or MULTI CONTROL %/fi
keys to select the appropriate subwoofer setting.
1SUBW ON : Subwoofer setting mode to the receiver is ON.
2SUBW OFF :
Subwoofer setting mode to the receiver is OFF.
•The initial setting is “SUBW ON”.
•When the setting “SUBW OFF” is selected, the front speakers
are automatically set to “FRNT LRG” and the procedure skips to
step 7.
Before step 7, press the SETUP key to accept the setting.
•When subwoofer output sound is required, select “FRNT NML”.
5Press the SETUP key to accept the setting.
•The Front speakers setting indication “FRNT LRG” appears.
6Use the MULTI CONTROL knob or MULTI CONTROL %/fi
keys to select the appropriate Front speakers setting.
1 FRNT LRG (large) :Large Front speakers are connected to
the receiver.
2 FRNT NML (normal) :Average size Front speakers are
connected to the receiver.
•For “FRNT LRG” selection, no sound will be heard from
Subwoofer speaker even when it is set to ON. However, if you
select “SW RE-MIX ON” when Subwoofer is selected, you will
be able to hear sound from the Subwoofer.
When in STEREO mode, the sound goes directly to Front
speaker.
7Press the SETUP key to accept the setting.
•The Center speaker setting indication “CNTR NML” appears.
8Use the MULTI CONTROL knob or MULTI CONTROL %/fi
keys to select the appropriate Center speaker setting.
If you have selected “LRG” as the Front speakers setting,
1CNTR NML (normal) :An average size Center speaker is
connected to the receiver.
2CNTR LRG (large) :A large Center speaker is connected to
the receiver.
3CNTR OFF : Center speaker setting mode to the
receiver is OFF.
If you have selected “NML” as the Front speakers setting,
1CNTR NML (normal) : An average size Center speaker is
connected to the receiver.
2CNTR OFF : Center speaker setting mode to the
receiver is OFF.
MULTI CONTROL
SETUP
POWER ON/OFF
SETUP
MULTI
CONTROL
POWER
ON/STANDBY
04.1.22, 4:14 PM14