18 EN
ENGLISH

Normal playback

Adjusting the sound

Adjusting the Tone (remote control only)

You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
1Press the TONE key to select the TONE mode.
2Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to
select TONE ON/OFF.
3When in TONE ON selection, press the TONE key for the following
displays.
BASS : Select this to adjust the low frequency range.
TREB : Select this to adjust the high frequency range.
4Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to
adjust the sound quality.
•The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.

Once-touch low frequency emphasis (Bass Boost)

(remote control only)

You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes.
Press the BASS BOOTS key.
•Press the key once to select the maximum (+10) low frequency
emphasis setting.
•TONE will automatically be turned ON.
•This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode. £~•

Switching back to the previous setting

Press the BASS BOOST key again.

VOLUME

MUTE

BASS BOOST

MULTI

CONTROL

ACTIVE EQ

VOLUME CONTROL

PHONES MULTI CONTROL

TONE

ACTIVE EQ

LOUDNESS

SPEAKERS ON/OFF

MUTE

Adjusting the Loudness mode (remote control only)

You can adjust the Loudness function which controls the low volume
settings to maintain the music’s richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
Press the LOUDNESS key to turn the LOUDNESS setting ON.

To cancel

Press the LOUDNESS key again so that the “LOUDNESS” indicator
goes off.

Muting the sound

The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.
•MUTE ON can also be deactivated by turning the volume control
knob.

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1ACTIVE EQ MUSIC : Effective when listening to music.
(The ACTIVE EQ LED indicator lights up.)
2ACTIVE EQ CINEMA : Effective when watching a movie.
(The ACTIVE EQ LED indicator lights up.)
3ACTIVE EQ TV : Effective when watching TV.
(The ACTIVE EQ LED indicator lights up.)
4ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ LED indicator goes off.)
•ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON and during 96kHz LPCM
playback.

Listening with headphones

1Press the SPEAKERS ON/OFF key so that the speaker indicator
goes off.
•If you turn off all of the speakers when in surround mode, the
surround mode will be canceled as well, resulting in stereo playback.
2Connect headphones to the PHONES jack.
PHONES
3Use the VOLUME CONTROL knob or VOLUME keys to adjust the
volume.
Make sure the SP indicator is turned OFF.
04.1.22, 4:14 PM18