Kenwood KRF-V4080D, KRF-V5580D, VR-804 Normal playback

18 EN
Listening to a source component
1
Use the INPUT SELECTOR knob or keys to select the source
you want to listen to.
The input sources change as shown below:
1“AUX”
2“TUNER”
3“CD/DVD”
4“TAPE” or “MD”
5“VIDEO1”
6“VIDEO2”
7“DVD” or “DVD/6CH” (for KRF-V4080D only)
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob or VOLUME keys to adjust
the volume.
Normal playback
Some preparatory steps are needed before starting playback.
Turning on this model
1Turn on the power to the related components.
2Turn on the power to this model by pressing POWER ON/
STANDBY (for VR-804) or POWER ON/OFF and ON/
STANDBY (for KRF-V4080D/V5580D) key.
Selecting the input mode
If you have selected a component connected to the CD/DVD, VIDEO2,
DVD (VR-804/KRF-V5580 only) or DVD/6CH (KRF-V4080D only) jacks,
make sure that the input mode setting is correct for the type of audio
signal to be used.
8
Selecting MD/TAPE
Select the source name corresponding to the component connected to
the MD/TAPE jacks. The initial factory setting is “TAPE”. To change the
source to “MD”, follow the steps below:
1Use the INPUT SELECTOR knob to select “TAPE”.
2Hold down the AUTO key for more than 2 seconds.
•The source indication changes to “MD”.
•To return to the original indication, repeat procedure 2.
Setting the speaker status
Press the SPEAKERS ON/OFF key to switch the speaker on or off.
Preparing for playback
The speaker indicator lights up.
AUTO INPUT SELECTOR
(KRF-V4080D/
V5580D)
POWER
ON/OFF
SPEAKERS
ON/OFF
ON/STANDBY
(KRF-V4080D/ V5580D)
(VR-804)
POWER
ON/STANDBY
INPUT SELECTOR
VOLUME CONTROL
Input
Selector
VOLUME
04.1.22, 9:15 PM18