31 EN
In case of difficulty
Remote control unit
Cause
•The remote control is set to a different
operation mode.
•Batteries are exhausted.
•The remote control unit is too far away from
the main system, controlling angle is too large,
or there is an obstacle between the receiver
and the remote.
•The audio cords and system control cords are
not connected properly.
•No tape or CD is placed in the source
component.
•An attempt is made to play a tape which is
being recorded in the cassette deck.
Remedy
•Press the source select keys or DVD POWER
keys to select the appropriate operation mode.
•Replace with new batteries.
•Operate the remote control unit within the
controllable range.
•Connect properly referring to “Setting up the
system”.
•Place the tape or CD in the source component
which you want to play.
•Wait for recording to complete.
Symptom
Remote control operation is not possible.
04.1.22, 9:23 PM31